12.8V 120Ah LiFePO4 Rechargeable Waterproof Deep Cycle for UPS Marine Backup Power System

Key Features Of 12v 120ah LiFePO4 Battery Pack:

  • Longer service life. より多い 3000 cycle times..About 7-8 years lifespan.
  • Plug in replacement of lead acid battery
  • High discharge rate capability.Max continous discharge 175A. Peak discharge 320A
  • Support parallel and series to make higher voltage and capacity.
  • Fast charge.Can be safely rapidly recharged in 1-3 hours
  • Lighter weight. について 1/3 the weight of lead acid.
  • Maintenance free
  • Low self discharge rate. Lower than 3% monthly
  • Deep cycle. Can be 100% deep discharged.
  • IP65 waterproof rating.Suitable for marine use
  • Safest performance. Lifepo4 is the safest lithium material. No fire or explosion

Intelligent Battery Management System(BMS)
1. Over charge protection function
2. Over discharge protection function
3. Over current protection function
4. Short protection function
5. Over temperature protection function
6. Automatic cell balance function

12.8V LiFePO4 Series Battery Applications

  • Solar/wind Energy storage system
  • ゴルフカート
  • Recreational Vehicles(RV)
  • Marine machine
  • UPS Backup power system
  • Solar street light

共有

お問い合わせください

製品説明

What it 12.8V 120Ah LiFePO4 Rechargeable batteries?

  • It’s a rechargeable battery delivering 12.8 volts (nominal voltage) with a capacity of 120 ampere-hours (ああ).
  • LiFePO4 stands for Lithium Iron Phosphate, which is the battery chemistry used.
  • Deep cycle refers to its ability to discharge a high percentage of its capacity repeatedly over many cycles.
  • Waterproof means it is sealed against water damage.

Why choose this 12.8v 120Ah LiFePO4 battery:

Here are key Features Of 12.8v 120ah LiFePO4 Battery Pack:

  • Longer service life: You mentioned 3000 cycles and a 7-8 year lifespan, which is significantly longer than lead-acid batteries that typically last around 500 cycles and 3-5 年. This translates to fewer battery replacements and lower overall costs.
  • Plug-in replacement for lead-acid batteries: Since the voltage is the same (12.8V), these LiFePO4 batteries can be directly installed in place of existing lead-acid batteries without modifying the charging system.
  • High discharge rate capability: The ability to deliver high currents (175A continuous, 320A peak) makes them suitable for powering devices with high surge currents, like motors found in power tools and some appliances.
  • Support for parallel and series connection: This allows for increased voltage or capacity depending on your needs. By connecting batteries in series, you can increase the voltage (e.g., connecting two 12.8V batteries in series will provide 25.6V). Parallel connection increases the capacity (e.g., connecting two 120Ah batteries in parallel will provide 240Ah at the same voltage).
  • Fast charging: Recharging in 1-3 hours compared to several hours for lead-acid batteries is a significant advantage, especially for applications where downtime is undesirable.
  • Lighter weight: Lighter weight is a major benefit, particularly in mobile applications like RVs, boats, and even drones where weight reduction is crucial.
  • Maintenance-free: Unlike lead-acid batteries, which require periodic maintenance like topping up electrolytes, LiFePO4 batteries require no such maintenance, saving time and effort.
  • Low self-discharge rate: At less than 3% per month, the self-discharge rate is minimal, so you can store the battery for extended periods without significant capacity loss.
  • Deep cycle capability: The ability to be deeply discharged (up to 100%) makes them ideal for applications requiring full use of their capacity, unlike some other battery types.
  • Waterproof rating: An IP65 rating signifies protection against water ingress, making them suitable for marine environments or applications exposed to moisture.
  • Safety: As you mentioned, LiFePO4 chemistry is one of the safest forms of lithium-ion batteries due to its inherent stability, reducing the risk of fire or explosion.

全体, 12.8V 120Ah LiFePO4 batteries offer a compelling combination of features that make them a superior choice for many applications compared to traditional lead-acid batteries.

How does 12.8v 120Ah LiFePO4 Batteries produced:

The manufacturing process involves several steps, 含む:

  • Making the electrode components, which involve lithium iron phosphate (LiFePO4) for the cathode and a carbon-based material for the anode.
  • Assembling the electrodes with a separator between them into a cell.
  • Filling the cell with an electrolyte solution.
  • Sealing the cell in a casing.
  • Testing and quality control.

10AH-12V-High-Rate-LiFePO4-Battery-BMS-High-Protection

Where does 12.8V 120Ah LiFePO4 Batteries can be used:

These batteries are versatile and can be used in various applications, 含む:

  • RV, campers, vans, and boats: They provide deep cycle power for running appliances and other electrical equipment.
  • Solar power systems: They can store solar energy for use later.
  • Off-grid applications: They provide a reliable power source in locations without access to the electrical grid.
  • Power tools: They can deliver the high currents needed for power tools.
  • Backup power: They can provide backup power for homes and businesses in case of a power outage.

PDFダウンロード

→HyXin-LFP-LiFePO4-12.8V-120Ah-Battery-Pack-Specification

120AH 12V LiFePO4 Series Battery Applications:
Solar/wind Energy storage system
ゴルフカート
UPS Backup power system
Solar street light
Recreational Vehicles(RV)
Marine machine

The 120Ah 12.8V high rate LiFePO4 battery is specially designed as a drop-in replacement to lead acid batteries. The 120Ah 12.8V LiFePO4 battery delivers omrepower, faster charging and longer life than comparable lead acid batteries. With high efficiency and ultra-fast charging and discharging capabilities, the The 120Ah 12.8V Lithium iron phosphate battery is an ideal solution for industrial applications where a long services and quick charing is needed.

基本パラメータ

12.8V 120Ah LiFePO4 Battery Specification Datasheet
アイテム General Parameters
定格出力 120AH @0.5C to 10.8V
貯蔵エネルギー 1536うーん
サイクル寿命@100%DOD 2000+ サイクル
約. 重さ 14kg
内部抵抗 ≤35.0 mΩ
マックス. 充電電流 100 あ
マックス. 放電電流 100 あ
充電終止電圧 14.6V
放電終止電圧 10.8V
寸法 L260mm×W180mm×H247mm
Low temperature self heating Avaliable(0~-20°C)
動作温度範囲
充電
-4°F (-20℃) 113°Fまで (45℃)
放電 -4°F (-20℃) 140°Fまで (60℃)
推奨 59°F (15℃) to 95°F (35℃)
自己放電率 ≤3%/月
平均寿命 (年) 10 years @25°C in 80%DOD
自己放電 約. 2% per month @ 25°C
長期保存庫 充電間隔 6 月
短絡保護 ショートを除去すると自動的に回復
端子の種類 メス銅インサート M8 (M8/mm)

HyXin 12V 120AH Lithium Iron Battery High Protection 12.8V 120Ah LiFePO4 Rechargeable Waterproof Deep Cycle for UPS Marine Backup Power System 10AH 12V High Rate LiFePO4 Battery BMS High Protection 3 12.8V 120Ah LiFePO4 Rechargeable Waterproof Deep Cycle for UPS Marine Backup Power System HyXin 12V LiFePO4 Series Connection Capable Battery applications 12.8V 120Ah LiFePO4 Rechargeable Waterproof Deep Cycle for UPS Marine Backup Power System

応用

非毒性コンポーネントを使用し、環境への影響を最小限に抑えた環境に優しいHYXinbattery 12v 48v バッテリー パック
12V LiFePO4 バッテリー パック アプリケーション UPS バックアップ バッテリー システム

内蔵バッテリー管理システム

BMS 管理システム 過電流に対する保護機能を内蔵, 短絡, 温度変動と

生産ライン

ESS 家庭用バッテリー システム用のバランス機能 HYXinbattery 生産ライン

生産工程

電池パック-製造工程-2

Packing & Certification

バッテリー出荷 - 12v LiFePO4 バッテリー パック HYXinbattery

Packing & Delivery

バッテリーの認証

認証

よくある質問

リードタイムはどれくらいですか?

標準セルの注文のリードタイムは次のとおりです。 3-7 米国および欧州連合内での迅速な配達の営業日. カスタムバッテリーパックの場合, 開発全体の推定リードタイム, 生産, そして配送プロセスは 25-30 営業日. しかし, バッテリーパックにさらに複雑な技術要件がある場合, このリードタイムは延長される可能性があります. 詳細については、当社のチームにお問い合わせください。.

エネルギー貯蔵ソリューションのサプライヤーとして HYXinbattery をお選びください. 私たちの工場は専門知識に優れています, 生産能力, 業界標準への準拠. 合理化された物流で, タイムリーな納品を保証し、お客様の特定のニーズを満たす柔軟なカスタマイズ オプションを提供します. 信頼できる製品と効率的なサービスについては、当社の実績を信頼してください。. HYXinbattery の利点を体験してください: 優れた品質, 納期について, カスタマイズされたソリューション.

当社の製品では, EVEのセルを使用しています, カトル, ゴション, REPTおよびその他の有名ブランド. 最も重要なプロセスは、各顧客固有のバッテリー パックのニーズに適したセルを決定することです, そして私たちの研究 & 開発チームはそれらの決定を下すための十分な準備を整えています.

私たちは保証を提供します 3 当社のセルとバッテリーパックは何年も使用可能. 万が一不具合があった場合には, 電池を交換いたします. しかし, 不適切にメンテナンスされたバッテリーには保証対象外となりますのでご了承ください。. 極性が間違っている場合も含みます, 不適切な取り付け, 保管中または使用中の過熱, 物理的損傷, 火, 凍結, 水害, 改ざん, 端子破損, バッテリーを適切に充電しないと, または定格充放電サイクルを超えた場合.

絶対に! HYXinbatteryにて, お客様の特定の要件を満たすカスタマイズ オプションを提供します. 会社のロゴやブランド要素をバッテリーパックに組み込む場合, シームレスに処理できます. 当社の専門家チームはお客様と緊密に連携し、カスタマイズのニーズに正確かつ専門的に対応します。. 安心してください, 私たちはお客様のブランド アイデンティティの重要性を理解しており、細心の注意を払って細部まで配慮して取り扱います。. 独自のブランドイメージを反映するパーソナライズされたソリューションには HYXinbattery をお選びください.

交通手段を選ぶときは, 私たちHYXinbatteryは安全を最優先します, 効率, そして費用対効果. 当社の経験豊富な物流チームが距離などのさまざまな要素を慎重に評価します, 音量, お客様の特定のニーズに最適な輸送方法を決定するための緊急性. 私たちは評判の良い運送会社や運送業者と信頼できるパートナーシップを確立しています。, 製品の安全かつタイムリーな配送を確保する. 安心してください, ご注文の安全かつ効率的な輸送を保証する最適な輸送方法を選択します, 予算要件を考慮しながら. 最大限の専門性を持ってお客様の輸送ニーズに対応する当社にお任せください.

お支払い方法: T/T(サポートデポジットカード). ペイパル (クレジットカードをサポート)
支払手数料: PayPalによる支払い (4.7% PayPal の追加料金). T/Tによるお支払い ($30 支払いごとに追加料金が発生する)

HYXinbatteryにて, 当社は製品の安全な配送を優先します. 配送には保険を適用しております, 輸送中の不測の事態が発生した場合に確実に保護されるようにする. さらに, すべての荷物に追跡番号を提供しています, 注文の進行状況をリアルタイムで監視できるようになります. 保険適用と追跡システムが整備されているため、, 商品が安全に到着し、目的地に到着するまでの道のりを追跡できるので、安心できます。.

HYXinbatteryにて, バッテリーパックには高品質のLiFePO4セルを使用しています. これらの細胞はその優れた安全性で知られています, 長いサイクル寿命, 高いエネルギー密度と. 当社では、バッテリーパックの信頼性と性能を確保するために、信頼できるメーカーから LiFePO4 セルを慎重に選択して調達しています。. イブなど, カトル, BYD, ゴション, 港峰, レプト, トップバンド, カルブなど,

交通手段を選ぶときは, 私たちHYXinbatteryは安全を最優先します, 効率, そして費用対効果. 当社の経験豊富な物流チームが距離などのさまざまな要素を慎重に評価します, 音量, お客様の特定のニーズに最適な輸送方法を決定するための緊急性. 私たちは評判の良い運送会社や運送業者と信頼できるパートナーシップを確立しています。, 製品の安全かつタイムリーな配送を確保する. 安心してください, ご注文の安全かつ効率的な輸送を保証する最適な輸送方法を選択します, 予算要件を考慮しながら. 最大限の専門性を持ってお客様の輸送ニーズに対応する当社にお任せください.

当社からバッテリーをご購入いただいた大切なお客様に充電器を提供させていただきます。. しかし, 申し訳ございませんが、スタンドアロン購入の場合は充電器を個別に提供することができません。. 当社からバッテリーをご購入いただく際には、請求書にバッテリー充電器の費用も含めさせていただきますのでご了承ください。. 詳細については, 私たちのチームに相談することをお勧めします. ご理解いただきありがとうございます.

HYXinbatteryにて, 当社は以下の重要な要素を通じて高品質のバッテリーパックを保証します。:
1. 優れたセルの選択: 当社は、信頼性と性能で知られる信頼できるサプライヤーから高品質のリチウムイオン電池を慎重に選択しています。.
2. 厳格な品質管理: 当社の製造プロセスは厳格な品質管理措置を遵守しています, バッテリーパックの一貫した正確な組み立てを保証します.
3. 高度なバッテリー管理システム (BMS): 当社のバッテリーパックには、過電流保護を提供する高度な BMS が装備されています。, 短絡保護, 温度検出保護, 機能性のバランスをとる, 安全かつ効率的な運用を確保する.
4. 広範なテスト: 総合的なテストを実施します, パフォーマンスも含めて, 安全性, および信頼性評価, バッテリーパックの品質と耐久性を検証するため.
5. 経験豊富な認定工場: 当社の最先端の工場は業界標準と認証に従っています, 高品質の製造プロセスとバッテリーの安全な輸送を保証します.

これらの要素に焦点を当てることで、, 当社のバッテリーパックが最高の品質基準を満たしていることを保証します, 安全性, そしてパフォーマンス, 信頼性が高く長持ちするエネルギー貯蔵ソリューションをお客様に提供します.

当社のお客様は、HYXinbattery の卓越したパフォーマンスと信頼性を常に賞賛してきました。. バッテリーの長寿命を高く評価しています, 費用対効果, 便利な Bluetooth モニタリング機能. 過電流保護などの機能を備えた信頼性の高いBMSシステム, 短絡保護, 安全性を確保するための温度検知機能が高く評価されています。. HYXinバッテリーパックに使用されているLiFePO4セルの高エネルギー密度と長いサイクル寿命も肯定的なフィードバックを受けています。. 全体, クライアントは HYXinbattery の品質を高く評価しています, 革新, 信頼性の高い家庭用エネルギー貯蔵ソリューションを提供するという取り組み.

お問い合わせください